Name: In-line ultrasonic flowmeter for nitrogen gas - FWD-N
SKU: FWD-N
Availability: InStock

Configure

Specifications

The FWD-N is an ultrasonic flow meter that measures gas nitrogen flow in pipes from 25 mm to 80 mm. Gas nitrogen flow meters are essential for ensuring the smooth running of industrial processes, optimizing their efficiency, detecting possible nitrogen leaks, and preventing waste while guaranteeing safety.

Pipe diameter (mm)	DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN150, DN200
Supply voltage	24 V DC ±10% or built-in battery type (battery life : approx.10 years at 20˚C)
Power consumption	24 V DC, 1.5 W or less
Applicable fluids	_N2 (diameter 25-80 mm)
Fluid temperature	10°C to 60°C, RH 90% or less
Working pressure	Less than 1 MPa (gauge pressure)
Scale (instantaneous flow) and accuracy	Diameter	Flow rate range (m ³/h)	Accuracy
			±2.0% of flow rate	±5.0% of flow rate
	DN25	±0.6-35	±3.5-35^m3/h	±0.6-3.5^m3/h
	DN32	±1.1-65	±6.5-65^m3/h	±1.1-6.5^m3/h
	DN40	±1.3-80	±8-80^m3/h	±1.3-8^m3/h
	DN50	±2.5-150	±15-150^m3/h	±2.5-15^m3/h
	DN65	±4-240	±24-240^m3/h	±4-24^m3/h
	DN80	±5-300	±30-300^m3/h	±5-30^m3/h
	DN100	±10-500	±50-500^m3/h	±10-50^m3/h
	DN150	±24-1200	±120-1200^m3/h	±24-120^m3/h
	DN200	±40-2000	±200-2000^m3/h	±40-200^m3/h
Air flow rate conversion accuracy	FWD025-080: ±2.5% of measurement (at 500 kPa, 25°C, dry air) FWD100-200: ±2.0% of measurement (at ≥ 300 kPa)
Display	1st line	Totalized value (m3) 8-digit, Instantaneous flow (l/mm) 8-digit
	^2nd line	Instantaneous flow (^Nm3/h) 5-digit (4-digit after 2000), Pressure (kPa) 5-digit, Temperature (°C) 3-digit
Outputs (not available with battery supply)	Current output	4-20 mA DCC (±0.5% PE), max. load resistance. 400Ω, max. current output 22 mA Instantaneous flow, pressure or temperature
	Contact output	2 contact outputs, max. load 24 V DC, 50 mA, max. frequency: 10 Hz,Output 1: pulses (forward), Output 2: pulses (reverse), high/low alarm, system error
Process connection type	⌀25, ⌀32 mm	⌀25 mm: Rc1, ⌀32 mm: Rc1-1/4
	⌀40-⌀80 mm	Flange mounting (JIS10K)
	⌀100-⌀200 mm	Flange mounting JIS10K
Mounting conditions (straight lengths)	⌀25, ⌀32 mm	20D or more upstream, 5D or more downstream When used for bidirectional measurement, 20D or more downstream and upstream
	⌀40-⌀200 mm	10D or more upstream, 5D or more downstream When used for bidirectional measurement, 10D or more downstream and upstream
Materials of wetted parts	Aluminum alloy, PPS, fluorosilicone rubber, etc.
Installation location	Indoor or outdoor (IP64 equivalent)
Storage temperature	-20°C to 70°C, non-condensing

Documentations